8.10.4.14 Pset_MechanicalBeamInPlane
8.10.4.14.1 Semantic definition
Properties about Mechanical Beam in Plane.
8.10.4.14.2 Applicable entities
8.10.4.14.3 Properties
| Name | Property Type | Data Type | Description | |
|---|---|---|---|---|
| YoungModulus | IfcPropertySingleValue | IfcModulusOfElasticityMeasure |
A measure of the Young's modulus of elasticity of the material. |
|
| YoungModulusMin | IfcPropertySingleValue | IfcModulusOfElasticityMeasure |
Elastic modulus, minimal value, α=0°. |
|
| YoungModulusPerp | IfcPropertySingleValue | IfcModulusOfElasticityMeasure |
Elastic modulus, mean value, α=90°. |
|
| YoungModulusPerpMin | IfcPropertySingleValue | IfcModulusOfElasticityMeasure |
Elastic modulus, minimal value, α=90°. |
|
| ShearModulus | IfcPropertySingleValue | IfcModulusOfElasticityMeasure |
A measure of the shear modulus of elasticity of the material. |
|
| ShearModulusMin | IfcPropertySingleValue | IfcModulusOfElasticityMeasure |
Shear modulus, minimal value. |
|
| BendingStrength | IfcPropertySingleValue | IfcPressureMeasure |
Bending strength. Defining values: α; defined values: bending strength. |
|
| TensileStrength | IfcPropertySingleValue | IfcPressureMeasure |
Indicates the ability to withstand breakage apart under applied force. |
|
| TensileStrengthPerp | IfcPropertySingleValue | IfcPressureMeasure |
Tensile strength, α=90°. |
|
| CompStrength | IfcPropertySingleValue | IfcPressureMeasure |
Compressive strength, α=0°. |
|
| CompStrengthPerp | IfcPropertySingleValue | IfcPressureMeasure |
Compressive strength, α=90°. |
|
| RaisedCompStrengthPerp | IfcPropertySingleValue | IfcPressureMeasure |
Alternative value for compressive strength, α=90°, which may be used under material and code dependent conditions (e.g. if deformation is tolerable, or far from ends of the member); conditions should be stated in SELF\IfcProperty.Description. |
|
| ShearStrength | IfcPropertySingleValue | IfcPressureMeasure |
Defining values: α; defined values: shear strength. |
|
| TorsionalStrength | IfcPropertySingleValue | IfcPressureMeasure |
Shear strength in torsion. |
|
| ReferenceDepth | IfcPropertySingleValue | IfcPositiveLengthMeasure |
Depth in bending for which the mechanical properties are valid; provided as a means to check the integrity of material assignment. |
|
| InstabilityFactors | IfcPropertyTableValue | IfcPositiveRatioMeasure/IfcPositiveRatioMeasure |
Defining values: slenderness ratios; defined values: either factors or divisors of the strength, depending on the design method (if <1: factors, if >1: divisors). |