6.2.4.17 Pset_DistributionPortTypePipe
6.2.4.17.1 Semantic definition
Pipe port occurrence attributes attached to an instance of IfcDistributionPort.
6.2.4.17.2 Applicable entities
- IfcDistributionPort/PIPE
6.2.4.17.3 Properties
| Name | Property Type | Data Type | Description | |
|---|---|---|---|---|
| ConnectionType | IfcPropertyEnumeratedValue | PEnum_PipeEndStyleTreatment |
The end-style treatment of the duct port: BEADEDSLEEVE: Beaded Sleeve. COMPRESSION: Compression. CRIMP: Crimp. DRAWBAND: Drawband. DRIVESLIP: Drive slip. FLANGED: Flanged. OUTSIDESLEEVE: Outside Sleeve. SLIPON: Slipon. SOLDERED: Soldered. SSLIP: S-Slip. STANDINGSEAM: Standing seam. SWEDGE: Swedge. WELDED: Welded. OTHER: Another type of end-style has been applied. NONE: No end-style has been applied. |
|
| ConnectionSubtype | IfcPropertySingleValue | IfcLabel |
The physical port connection subtype that further qualifies the ConnectionType. The following values are recommended:
|
|
| NominalDiameter | IfcPropertySingleValue | IfcPositiveLengthMeasure |
Nominal diameter or width of the object. The nominal diameter of the pipe connection. |
|
| InnerDiameter | IfcPropertySingleValue | IfcPositiveLengthMeasure |
The actual inner diameter of the object. |
|
| OuterDiameter | IfcPropertySingleValue | IfcPositiveLengthMeasure |
The actual outer diameter of the object. |
|
| Temperature | IfcPropertyBoundedValue | IfcThermodynamicTemperatureMeasure |
Temperature of the fluid. |
|
| VolumetricFlowRate | IfcPropertyBoundedValue | IfcVolumetricFlowRateMeasure |
The volumetric flow rate of the fluid. |
|
| MassFlowRate | IfcPropertyBoundedValue | IfcMassFlowRateMeasure |
The mass flow rate of the fluid. |
|
| FlowCondition | IfcPropertyBoundedValue | IfcPositiveRatioMeasure |
Defines the flow condition as a percentage of the cross-sectional area. |
|
| Velocity | IfcPropertyBoundedValue | IfcLinearVelocityMeasure |
The velocity of the fluid. |
|
| Pressure | IfcPropertyBoundedValue | IfcPressureMeasure |
The pressure of fluid. |